Fall Protection Equipment , Load Arrestors

Fall Protection Equipment Load Arrestors

Browse by Category

Accepted Payment Methods

SMALL Series 500kg Load Arrestor KD4PLA5005

SKU KD4PLA5005 Categories Fall Protection Equipment, Load Arrestors Brand: 3M DBI Sala

Only £1,875.00
(£1,562.50 ex VAT)

Sala ‘SMALL’ Series Load Arrestor KD4PLA5005. 500kg, 5M length, auminium housing with 7mm galvanised cable.

The Sala range of Load Arrestors are safety devices used augment other lifting devices, such as cranes and hoists providing additional protection to stop and arrest the fall of a load if the primary system fails and will protect personnel around the area.

The Sala range of Load Arrestors are safety devices used augment other lifting devices, such as cranes and hoists providing additional protection to stop and arrest the fall of a load if the primary system fails and will protect personnel around the area.

Sala range has 3 body sizes, small, medium, and large.

Supporting loads from 100kg up to 3000kg, with different cable lengths.

The load arrestor is installed next to the main lifting device.

The cable is then secured to the load.

In the event of a failure of the main lifting device, the arrestor senses a fast descent speed in excess of 0.5m/sec

Will automatically engage the inertia-activated brake that acts on the rope drum.

This stops the load within 1m and absorbs the shock forces.

Variety of wire cable lengths : KD4PLA3012 – 5m, KD4PLA4008 – 8m, KD4PLA5005 – 5m

Applications