Sala Anchorages

Sala Re-Useable Detent Wall Anchor 2101005

Sala Detachable Re-Useable Detent Wall Anchor 2101005. Utilising pre-installed sockets in to concrete, the detent wall anchor allows the user to connect and disconnect from an anchorage point simply by pressing a button. Options: 2101005: Assembly including Pin, Socket and Cap 2101003: Detent Pin 2101001: Detent Socket and Cap Specifications: Weight: Detent Anchor : 0.25kg - Socket : 0.16kg Material: 316 Stainless steel Standards: OSHA, ANSI, CE - EN795 Class A, Class B Rated capacity: 1 user - 141kg Minimum breaking strength: 22 kN

Only £102.95

(£85.79 ex VAT)

Sala Re-useable Concrete D-Ring Anchor 2104565

SALA Re-useable Concrete D-Ring Anchor 2104565. Re-useable D-ring assembly, just install a new bolt and it’s ready for use again. Rugged design for harsh environments with no moving or fragile parts to foul-up. Safe “hook-up” indicator notifies the user the anchor has been installed properly. For flexibility, install into 18mm or 19mm holes - only standard drill bits needed. 22.2kN rated, CE - EN795 compatible connection point swivels 360° for safety and useability. Concrete D-ring Anchor and Bolts 2104565: D-ring Assembly with 1 Bolt 2104566: D-ring Assembly with 6 Bolts 2104567: D-ring Assembly with 12 Bolts

Only £91.95

(£76.63 ex VAT)

Sala Freestanding Counterweight Anchor 7255003

SALA Freestanding Counterweight Anchor 7255003. 7255003: Freestanding Counterweight Anchor, includes sixteen 20.3kg plates, roof post, base and D-ring 7200439: Single Counterweight Only, 20.3kg Meets EN 795, Class E requirements.

Only £1789.00

(£1490.83 ex VAT)

Sala MOBI-LOK™ SELF-CONTAINED AVIATION VACUUM ANCHOR SYSTEM 2200125

MOBI-LOK™ SELF-CONTAINED AVIATION VACUUM ANCHOR SYSTEM 2200125. With a Vacuum Anchor System at your workers’ side, they can anchor to virtually any smooth, non-porous surface simply by flipping a switch and waiting for the green light. So whether they need to replace a broken strobe atop a jumbo jetliner or perform routine maintenance, they’ll always be able to quickly, and easily put themselves where they need to be—without putting themselves in danger. Materials-Specifications Our most portable, user-friendly Vacuum Anchor System. Designed for basic, one-person use, this system is completely self-contained. No separate pumps, vacuum hoses or other components. It can be powered up quickly and easily with a single, on-board compressed gas bottle or a large capacity detached bottle, or shop air.

Only £7195.00

(£5995.83 ex VAT)

Sala MOBI-LOK™ SELF-CONTAINED AVIATION VACUUM ANCHOR SYSTEM WITH BOTTLE ATTACHMENT 2200126

SALA MOBI-LOK™ SELF-CONTAINED AVIATION VACUUM ANCHOR SYSTEM 2200126. With Bottle Attachment. With a Vacuum Anchor System at your workers’ side, they can anchor to virtually any smooth, non-porous surface simply by flipping a switch and waiting for the green light. So whether they need to replace a broken strobe atop a jumbo jetliner or perform routine maintenance, they’ll always be able to quickly, and easily put themselves where they need to be—without putting themselves in danger. Materials-Specifications Our most portable, user-friendly Vacuum Anchor System. Designed for basic, one-person use, this system is completely self-contained. No separate pumps, vacuum hoses or other components. It can be powered up quickly and easily with a single, on-board compressed gas bottle or a large capacity detached bottle, or shop air.

Only £7915.00

(£6595.83 ex VAT)

Sala MOBI-LOK™ Vacuum Anchor for General Industry 2200110

SALA MOBI-LOK™ Vacuum Anchor for General Industry 2200110. With a Vacuum Anchor System at your workers’ side, they can anchor to virtually any smooth, non-porous surface simply by flipping a switch and waiting for the green light. So whether they need to repair a skylight atop a locomotive or repaint a section on a water tower, they’ll always be able to quickly, and easily put themselves where they need to be—without putting themselves in danger. Materials-Specifications: Our most portable, user-friendly Vacuum Anchor System. Designed for basic, one-person use, this system is completely self-contained. No separate pumps, vacuum hoses or other components. It can be powered up quickly and easily with a single, on-board compressed gas bottle or a large capacity detached bottle, or shop air.

Only £7455.00

(£6212.50 ex VAT)

Sala Fixed Beam Anchor 2108412

Fixed Beam Anchor 2108412. Similar Items : 2108413 Beam Flange Sizes : 6.35cm to 45.72cm, I Beam Thickness : 3.81cm 2108414 Beam Flange Sizes : 6.35cm to 60.96cm, I Beam Thickness : 3.81cm 2108415 Beam Flange Sizes : 30.48cm to 91.44cm, I Beam Thickness : 6.35cm

Only £296.95

(£247.46 ex VAT)

Sala Adjustable Door and Window Jamb Anchor 2100080

SALA Adjustable Door and Window Jamb Anchor 2100080. The Door/Window Jamb Anchor allows the user the ability to install a fall protection rated anchorage connector without the need to penetrate into anything. The man-rated anchor requires no tools for attachment and is rated for 1,633 Kilos.

Only £335.00

(£279.17 ex VAT)

Sala Glyder™2 Sliding Beam Anchor for Beam Flanges KM22104700

Sala Glyder™2 Sliding Beam Anchor for Beam Flanges KM22104700. Glyder2 is designed with the worker in mind. It’s simply the safest, lightest and easiest to use beam anchor in the world! Complete Versatility and Freedom of Movement The Glyder™2 provides fall protection and complete horizontal mobility while working on structural steel such as I-beams. For complete jobsite flexibility, the device can be at- tached overhead or at your feet. Once installed, the Glyder™2 will effortless- ly follow the worker, in synthetic wear pads that eliminate metal-to-metal contact, reducing friction, providing smooth operation. The Glyder™2 is designed to work with any standard CE approved lanyard.

Only £335.00

(£279.17 ex VAT)

Sala Concrete Webbing Strap Anchor 2100056

SALA Concrete Webbing Strap Anchor 2100056 Don’t let this anchor’s simple design and compact size fool you. When properly installed, it provides the user with a fully compliant 22 kN fall arrest rated anchor point. Durable polyester construction with a full length outer protection sheath provides abrasion resistance that stands up to the abusive concrete work environment. In addition, an integrated D-ring tie-off point makes the anchor compatible with most fall protection products on the market (eg. shock absorbing lanyard or self retracting lifeline). When the job is complete, the device is simply cut off and discarded. 2100056: Concrete Strap Anchor with D-ring, 105 cm 2100057: Concrete Strap Anchor with D-ring, 122 cm Specifications: Rated Capacity: 141kg (310 lbs.) Hardware: Alloy steel D-ring Webbing: 4.4cm (1-3/4”) polyester strength member, 5.7cm (2-1/4”) polyester wear pad Minimum Breaking Strength: 22kN (5,000 lbs.) when loaded within the recommended working range Standards: EN 795 Class A requirement

Only £20.40

(£17.00 ex VAT)